For use in mass termination of cable for 28 to 24 AWG 7-strand wire
Multi version has offset flanges to allow connectors to be stacked closely together
Designed for use in class 2 circuits with voltages defined by the National Electrical Code Table 725-31 (a) and (b)
Side entry standard, grounded at the panel
Housing and insert made from glass filler polyester rated UL94V-0, black
Connector is fully shielded for protection from EMI/RFI with brass plated with bright tin
Four contacts standard, 0.35mm phosphor bronze with selective gold plate over nickel in contact area and tin over nickel on solder tails

Engineering Drawings

MATERIALS:

Housing:

Glass filled polyester, UL94V-0 rated, black

Insert:

Glass filled polyester, UL94V-0 rated, black

Contacts:

Phosphor bronze, 0.35mm thick

Contact plating:

Gold over nickel in contact area
tin over nickel on solder tails

ELECTRICAL SPECIFICATIONS:

Operating voltage:

30VAC/42.4VDC

Current rating:

1.5 amps max.

Contact resistance:

25 milliohms max.

Insulation resistance:

500 megohms min.

Dielectric withstanding voltage:

1,000VAC for 1 min.

Operating temperature:

-20°C to +80°C

ORDERING FORM

Your name	(Required)
Your email	(Required)
Your company	(Optional)
Your phone	(Optional)
How were you referred to our site?:	(Optional)
Optional Message You may add a brief comment or make a special request here.	(Maximum characters: 200) You have characters left.
Enter the text as you see it below
Reload Image

Diagram

Multi Type Diagram

Multi Type Data Link Connectors Series = CDL