CCM Electronic Components Catalog

Antennas (ANT Series) — A variety of hand-held and portable antennas available. Antenna connector types include BNC, SMA Female, SMA Male, Motorola, S-type, ICOM, MMCX right angle and MMCX straight.

BNC and RF Connectors — Conform to military specifications. High and low designs available with quick connect/disconnect coupling locks. RF connectors available in BNC, TNC, SMA and Twin-AX types. Quick connect/disconnect coupling lock design. Plastic or metal insulators.

Cable Assemblies, Adapters, Patch Cords — Custom cable assemblies and adapters are our specialty. We wire what we manufacture to fit any specification. In addition to custom cables and adapters, we also offer a line of standard cables and patch cords.

Card Edge Connectors — CCM card edge connectors conform to military specifications, use a double loop contact design and require low insertion and extraction force. VESA types comply with micro channel architecture (MCA) with superior conductivity. PCI card edge family also available.

Coils, Transformers and Inductors — We manufacture a variety including air coils, balun coils, bead inductors, chip inductors, choke coils, coil filters, current transformers, EMI filters, ferrite cores, high frequency transformers, LAN coils and transformers, leaded inductors, power inductors, power transformers, pulse transformers, telecom transformers and toroidal transformers.

Data Link Connectors — CCM data link connectors are fully shielded brass with a bright tin finish. Contacts are phosphor bronze (0.35mm thick) with selective gold plate on contact area and tin over nickel on the solder tails. Inserts and housings are black glass filled polyester rated UL94V-0.

D-Subminiature Connectors, Backshells, Hardware — Conform to military specifications and meet EIA, RS232, RS442, RS449 and IEC 48-B106 standards as well as FCC Part 15 Subpart J emission limits. Ferrite filters to reduce interference available on some models.

Earphone, DIN, DC, RCA Plugs, Jacks — Earphone jacks mate with 3.5mm plugs. Circular DIN and Mini DIN jacks and plugs conform to European and FCC standards. DJ power jacks include low profile types and miltiple models. RCA photo jacks available in many colors and configurations.

Euro DIN 41612 Connectors (CED Series) — Male and female types B, C, Q and R available, including 1, 2 and 3 row versions. Some models also have press fit, first-mate-last-break and board lock options. Three levels of selective gold plating available.

ExpressCard^* (ECA Series) — These modular cards provide hot-pluggable expansion capability that support sealed desktop chassis' and thinner laptop designs. Built on existing PCI Express and USB architectures to keep manufacturing costs down. (*ExpressCard is a trademark of the PCMCIA Trade Association)

Fiber Optic Media (CFO Series) — Fiber optic products include FC, LC, SC, ST, MT-RJ, MU, D4, DIN, E2000 and SMA connectors, patch cords, adapters and attenuators. Specialty cable assemblies, loopbacks, fan-outs, with or without connectors at either end. Single-mode or multi-mode available.

Flat Cable IDC Headers, Plugs, Sockets — We offer a wide variety of models and pitches, including flat cable sockets and plugs, DIP plugs, latch headers, flat cable sockets, edge card sockets, low profile and high density sockets, intensive contact sockets and much more.

FPC/FFC Connectors (CFPC Series) — We manufacture more than 30 types of FPC (Flexible Printed Circuit) and FFC (Flat Flexible Cable) connectors. ZIF and LIF types. Available with upper, lower, or upper and lower contacts. Reversed position connectors available. Tin or two levels of gold plating.

Headers, Housing, Shunts, Receptacle Strips — A large variety of housings; wire housings; power, box, latch and pin headers; receptacle strips; shunts; disconnectable connectors; ZIF and Non-ZIF DIP wafers; disk drive power connection systems; SMT type connectors, and much more.

High Definition Multimedia Interfaces (HDMI Series) — HDMI connectors, male and female. Solder and clip types, with and without hoods and flanges as well as right-angle through-hole mounts. Male versions available as an assembly or molded type. Three levels of selective gold plate.

Display Ports — Display Port Receptacles, cables, adaptors, and plugs . Male and Female. 20 positions. Gold and Black flash contact plating. Gold and Nickel Shell Plating. Wide variety and several options available.

IC, PLCC and SOJ Sockets — This section includes IC sockets, production sockets, low profile, surface mount and through-hole PLCC sockets, and small outline J-leaded sockets (SOJ). Conform to MIL-S-83734 and EIA RS415 standards. Customization available for some sockets.

Miniature Ribbon Centronics Connectors (MRC Series) — These connectors conform to Centronics standards with a heavy duty contact design for long cycle life. Industry standard 14, 24, 36 and 50 positions available. A selection of colors and mounting options.

Modular Telephone Plugs, Jacks — We offer a full range of modular telephone plugs, modular telephone jacks, modular assembly tools, ganged modular telephone jacks, category 5 keystone jacks and modular inline couplers, all of which conform to FCC requirements. Many options and sizes.

Small Computer Systems Interface Connectors (SCSI Series) — "Scuzzy" (SCSI) connectors for hard drives, CR-ROMs and other peripherals. Copper alloy contacts with three levels of gold plate, PBT housings and steel or plastic shells. Sizes include 26, 36, 40, 50, 68 or 100 positions.

Serial ATA Connectors (SATA Series) — Straight, right-angle and surface mount types with a selection of gold flash or three levels of gold plate on contact area. Choice of Nylon 6T or LCP housing material and board lock styles. Sizes include 7, 22 and 32 positions. Contact us for customized versions.

Switches (SWT Series) — Keylock switches have zinc alloy diecast housing and cylinder, and bright chrome plate or stainless steel capped bezel. Mechanisms with or without pin or disc tumblers; key-pull in one or more positions; silver plated contacts. Options for all keyed alike or up to 10,000 combinations.

Terminal Blocks, Headers, Barrier Strips (CMTB Series) — Seven 5.00mm-pitch and three 10.00mm-pitch styles in the 500 series, eight 5.00mm-pitch styles in the 515 series and nine 7.62mm-pitch styles in the 700 series. Black, green or blue thermoplastic body.

Terminals, Lugs and Spades — Choose from among a variety of 64 types of terminals, lugs, spades, ring terminals, ring lugs and spade lugs. With or without tin or gold flash plating. Most styles sold by the reel. Check models for packaging quantities available.